NTPsec

Dare's NTP GPS/PPS Stratum 1 Timeserver Statistics Page

Report generated: Wed Dec 19 05:00:02 2018 UTC
Start Time: Tue Dec 18 05:00:01 2018 UTC
End Time: Wed Dec 19 05:00:01 2018 UTC
Report Period: 1.0 days
Warning: plots clipped

Local Clock Time/Frequency Offsets

local offset plot

Percentiles...... Ranges...... Skew- Kurt-
Name Min1%5%50%95% 99%Max   90%95%StdDev  MeanUnits nessosis
Local Clock Time Offset-37.683-23.664-15.1930.83816.100 25.85654.03331.29349.52010.0710.854µs-3.231 9.432
Local Clock Frequency Offset-44.018-44.002-43.949-42.683-41.838 -41.740-41.6932.1112.2620.665-42.820ppm-2.792e+051.826e+07

The time and frequency offsets between the ntpd calculated time and the local system clock. Showing frequency offset (red, in parts per million, scale on right) and the time offset (blue, in μs, scale on left). Quick changes in time offset will lead to larger frequency offsets.

These are fields 3 (time) and 4 (frequency) from the loopstats log file.



Local RMS Time Jitter

local jitter plot

Percentiles...... Ranges...... Skew- Kurt-
Name Min1%5%50%95% 99%Max   90%95%StdDev  MeanUnits nessosis
Local RMS Time Jitter3.8485.3956.2028.42910.828 11.97613.3494.6266.5811.4158.463µs 138.5 769.2

This shows the RMS Jitter of the local clock offset. In other words, how fast the local clock offset is changing.

Lower is better. An ideal system would be a horizontal line at 0μs.

RMS jitter is field 5 in the loopstats log file.



Local RMS Frequency Jitter

local stability plot

Percentiles...... Ranges...... Skew- Kurt-
Name Min1%5%50%95% 99%Max   90%95%StdDev  MeanUnits nessosis
Local RMS Frequency Jitter0.9121.1191.2901.8754.045 7.06710.9432.7555.9481.0972.210ppb 7.525 42.19

This shows the RMS Frequency Jitter (aka wander) of the local clock's frequency. In other words, how fast the local clock changes frequency.

Lower is better. An ideal clock would be a horizontal line at 0ppm.

RMS Frequency Jitter is field 6 in the loopstats log file.



Local Clock Time Offset Histogram

local offset histogram plot

Percentiles...... Ranges...... Skew- Kurt-
Name Min1%5%50%95% 99%Max   90%95%StdDev  MeanUnits nessosis
Local Clock Offset-37.683-23.664-15.1930.83816.100 25.85654.03331.29349.52010.0710.854µs-3.231 9.432

This shows the clock offsets of the local clock as a histogram.

The Local Clock Offset is field 3 from the loopstats log file.



Summary


Percentiles...... Ranges...... Skew- Kurt-
Name Min1%5%50%95% 99%Max   90%95%StdDev  MeanUnits nessosis
Local Clock Frequency Offset-44.018-44.002-43.949-42.683-41.838 -41.740-41.6932.1112.2620.665-42.820ppm-2.792e+051.826e+07
Local Clock Time Offset-37.683-23.664-15.1930.83816.100 25.85654.03331.29349.52010.0710.854µs-3.231 9.432
Local RMS Frequency Jitter0.9121.1191.2901.8754.045 7.06710.9432.7555.9481.0972.210ppb 7.525 42.19
Local RMS Time Jitter3.8485.3956.2028.42910.828 11.97613.3494.6266.5811.4158.463µs 138.5 769.2
Summary as CSV file

Glossary:

frequency offset:
The difference between the ntpd calculated frequency and the local system clock frequency (usually in parts per million, ppm)
jitter, dispersion:
The short term change in a value. NTP measures Local Time Jitter, Refclock Jitter, and Peer Jitter in seconds. Local Frequency Jitter is in ppm or ppb.
kurtosis, Kurt:
The kurtosis of a random variable X is the fourth standardized moment and is a dimension-less ratio. ntpviz uses the Pearson's moment coefficient of kurtosis. A normal distribution has a kurtosis of three. NIST describes a kurtosis over three as "heavy tailed" and one under three as "light tailed".
ms, millisecond:
One thousandth of a second = 0.001 seconds, 1e-3 seconds
mu, mean:
The arithmetic mean: the sum of all the values divided by the number of values. The formula for mu is: "mu = (∑xi) / N". Where xi denotes the data points and N is the number of data points.
ns, nanosecond:
One billionth of a second, also one thousandth of a microsecond, 0.000000001 seconds and 1e-9 seconds.
percentile:
The value below which a given percentage of values fall.
ppb, parts per billion:
Ratio between two values. These following are all the same: 1 ppb, one in one billion, 1/1,000,000,000, 0.000,000,001, 1e-9 and 0.000,000,1%
ppm, parts per million:
Ratio between two values. These following are all the same: 1 ppm, one in one million, 1/1,000,000, 0.000,001, and 0.000,1%
‰, parts per thousand:
Ratio between two values. These following are all the same: 1 ‰. one in one thousand, 1/1,000, 0.001, and 0.1%
refclock:
Reference clock, a local GPS module or other local source of time.
remote clock:
Any clock reached over the network, LAN or WAN. Also called a peer or server.
time offset:
The difference between the ntpd calculated time and the local system clock's time. Also called phase offset.
σ, sigma:
Sigma denotes the standard deviation (SD) and is centered on the arithmetic mean of the data set. The SD is simply the square root of the variance of the data set. Two sigma is simply twice the standard deviation. Three sigma is three times sigma. Smaller is better.
The formula for sigma is: "σ = √[ ∑(xi-mu)^2 / N ]". Where xi denotes the data points and N is the number of data points.
skewness, Skew:
The skewness of a random variable X is the third standardized moment and is a dimension-less ratio. ntpviz uses the Pearson's moment coefficient of skewness. Wikipedia describes it best: "The qualitative interpretation of the skew is complicated and unintuitive."
A normal distribution has a skewness of zero.
upstream clock:
Any remote clock or reference clock used as a source of time.
µs, us, microsecond:
One millionth of a second, also one thousandth of a millisecond, 0.000,001 seconds, and 1e-6 seconds.



This page autogenerated by ntpviz, part of the NTPsec project
html 5    Valid CSS!